1. Pull the crown out to the fully extended position to set the time. If you turn the crown counterclockwise, then the hands will move clockwise, and vice versa. 

2. Once the time has been set, push the crown back into its original position as close as possible to the case to ensure waterproofness. Indeed, if the crown is not properly replaced, water can penetrate inside your watch (as with any watch).



In normal use, your AWAKE just needs to be worn to work. However, the first charge requires specific attention.

For this first charge, here is our recommendation: the watch must be exposed at least 25 hours to direct natural light (therefore not on the wrist). This implies at least 3 days of charging if you only have 8 hours of daylight per day for example. Following this, your watch will operate normally.